Metallkraft 4001015, Operating Instructions Manual

Page: 18 / 36

18 WPP Series | Version 1.02
Operation
8 Operation
WARNING!
Danger due to insufficient qualification of persons!
Unqualified persons can not assess the risks involved in
handling the workshop press and expose themselves and
others to the risk of serious or fatal injuries
- All work should only be carried out by qualified persons.
- Keep inadequately qualified persons out of the work area.
WARNING!
Risk of crushing!
The upper limbs must be kept away from the machine when
machining the workpiece.
WARNING! DANGER OF EXPLOSION !
Never press containers of highly flammable or explosive
substances, aerosols or pressurized containers.
Never press objects made of brittle materials such as con-
crete or stone.
ATTENTION!
The following rules must be followed.
- Never carry out any work on the workshop press under the
influence of alcohol, drugs or medication and / or over-fa-
tigue or concentration-disturbing illnesses.
- The workshop press may only be operated by a trained
person.
ATTENTION!
Before you start using the workshop press for the first time,
do the following:
- Check all screw connections on the installed workshop
press and re-tighten if necessary.
- Fill the tank with hydraulic oil and close the filler hole.
- Remove the air out of the hydraulic system.
- Check the hydraulic lines and connections for leaks.
- Check the electrical wiring and connections.
Wear protective glove!
Wear safety shoes!