Metallkraft 4001015, Operating Instructions Manual

Page: 4 / 36

4 WPP Series | Version 1.02
Introduction
1 Introduction
You have made an excellent choice in purchasing a METALLKRAFT hydraulic
workshop press.
Carefully read the operating instructions prior to commissioning.
They describe correct commissioning, intended use and safe as well as effi-
cient operation and maintenance of your hydraulic workshop press.
The operating instructions form part of the hydraulic workshop press. Keep
these operating instructions at the installation location of your hydraulic work-
shop press. Please also note the locally applicable accident prevention regu-
lations and general safety regulations for the use of hydraulic workshop
presses.
Illustrations in this operating manual serve the general understanding and
may deviate from the actual design.
1.1 Copyright
The contents of these operating instructions are protected by copyright. Their
application is permitted within the context of the use of the hydraulic work-
shop press. Any further use shall not be permitted without written consent by
the manufacturer.
1.2 Customer service
Please contact your specialist retailer if you have any questions regarding
your workshop press or require any technical information. Your specialist re-
tailer will be happy to support you with specialist advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0951 96555-111
E-Mail: service@stuermer-maschinen.de
Internet:
www.metallkraft.de
Spare parts orders:
Fax: 0951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
We are always interested in information and experiences that arise from the
application and can be valuable for the improvement of our products.
1.3 Disclaimer
All data in these operating instructions has been compiled on the basis of the
state-of-the-art, valid standards and guidelines as well as our many years of
expertise and experience.