Metallkraft 4001015, Operating Instructions Manual

Page: 9 / 36

Intended use
WPP Series | Version 1.02 9
- Do not pull on the mains lead to pull the plug out of the socket. Protect
the cable from heat, oil and sharp edges.
- Disruptions that affect safety have to be eliminated immediately.
- Protect the workshop press from moisture (danger of short circuit).
- Before using the workshop press, make sure that no parts are dam-
aged. Damaged parts must be replaced immediately to avoid danger
sources.
- Do not overload the workshop press! You work better and safer in the
specified performance range.
- Only use original spare parts and accessories to avoid possible risks
and risks of accidents.
2.6 Safety identifications on the workshop press
The following safety identifications have been attached to the workshop press
(Fig. 1) which must be observed.
Fig. 1: Safety identifications - 1 Warning sign: Danger high voltage, Pinching hazard for the upper
limbs | 2 Prohibition sign: Do not enter |
3 Mandatory signs: Read the operating manual, Pull out the mains plug, wear eye protec-
tion, Safety clothing, wear safety shoes
The safety markings and instructions attached to the workshop press must
not be removed. Damaged or missing safety markings can lead to malfunc-
tions, personal injury and material damage. They have to be replaced imme-
diately.
If the safety markings are not immediately recognizable and comprehensible,
the workshop press must be taken out of operation until new safety markings
have been affixed.
3 Intended use
The hydraulic pillar workshop press WPP 15, WPP 20 and WPP 30 is intended
for use in mechanical workshops in the automotive and engineering indus-
tries. It is ideally suited for pressing and removing bearings, bushes, shafts
and bolts as well as for stamping, bending and punching. The hydraulic en-
ergy is built up by means of a hydraulic hand pump. The workshop press con-
vinces with its small footprint and easy handling. The table height adjustment
takes place on model WPP 30 via a mechanism with winch.
Proper use also includes compliance with all information in this manual. Any
use beyond the intended use or otherwise is considered misuse.
1
2
3
NOTE!
The improper use, unauthorized modifications or alter-
ations to the workshop press as well as the disregard of the
safety regulations or the operating instructions exclude a
liability of the manufacturer for resulting damage to per-
sons or objects and cause the warranty to lapse!