Metallkraft 4001015, Operating Instructions Manual

Page: 12 / 36

12 WPP Series | Version 1.02
Transport, packaging, storage
5 Transport, packaging, storage
5.1 Delivery and transport
Delivery
Check the hydraulic workshop press for visible transport damage upon deliv-
ery. Immediately notify the haulage company or retailer if you identify damage
on the hydraulic workshop press.
Transport
The workshop press may only be loaded and unloaded and transported by
qualified specialist personnel.
Transport with crane:
.
Fig. 4: Transport with crane or forklift
The workshop press can be placed in a suitable location with a crane. To do
this, the workshop press must be attached to the crane in accordance with
the regulations (Fig. 4). Transport only with steel cables and hooks designed
for the weight of the press. The lifting points intended for transport by crane or
forklift must be used on the workshop press. The workshop press must not be
rocked during transport by crane.
WARNING!
Danger to life!
If the weight of the workshop press and the permissible lift-
ing capacity of the lifting gear are not observed during
transport or lifting, the workshop press may tip over or fall.
- During transport and lifting work, pay attention to the
weight of the workshop press and the permissible load ca-
pacity of the lifting equipment.
- Check lifting gear and load attachment means for perfect
condition.
DANGER!
Danger to life due to falling of the load!
Falling loads can cause serious injury or even death.
- Never step under suspended loads.
- Fix loads carefully.
- When leaving the workplace, lower the load.