Metal Work FLUX 0, User Manual

Page: 18 / 46

18
OFF
ON
OFF
ON
Flow / P
ressu
re
Hysteresis Mode Hysteresis Mode
FL-1(FL-2)
L-1(L-2)
FH-1(FH-2)
H-1(H-2)
OFF
ON
OFF
ON
FL-1(FL-2)
L-1(L-2)
FH-1(FH-2)
H-1(H-2)
OFF
ON
0 L
OFF
ON
0 L
Time
AdH1 AdL1
AdH2 AdL2
OFF
ON
Time
50ms
Flow Range 500mL
5mL
1000mL 5L 10L 50L 100L 200L
10mL 0.05L 0.1L 1L 2L 0.5L Pulse Output Rate
Normal Open Mode Normal Close Mode
FL-1(FL-2)
L-1(L-2)
FH-1(FH-2)
H-1(H-2)
OFF
ON
OFF
ON
P-1(P-2)
FL-1(FL-2)
L-1(L-2)
FH-1(FH-2)
H-1(H-2)
P-1(P-2)
Time
AdH1 AdL1
AdH2 AdL2
P
ressu
re
Flow
【 NOTE: 】
*1. In case hysteresis is set at less than or equal to 2 digits, switch output may chatter if input pressure fluctuates near the set point.
*2. When using window comparator mode, the difference between two set points must be greater than the fixed hysteresis, otherwise
will cause the switch output to malfunction.
Window Comparator Mode
One Point Set Mode
Accumulated Output Mode
Accumulated Pulse Output Mode
Flow / P
ressu
re
Accumulated Output Mode
Flow
One Point Set Mode
P
ressu
re
Window Comparator Mode
Flow / P
ressu
re
Flow / P
ressu
re