8
1
Introduction
1.1
Intended use
Safe use of this controller can only be guaranteed if it is used for its intended purpose. The
manufacturer is not responsible for damage that is caused by external components or failure to
comply with these instructions.
-
Modifications are only permitted in consultation with the manufacturer. The manufacturer’s
declaration of conformity will no longer be valid if modifications are made without receiving
consent from the manufacturer.
-
When installing, commissioning, maintaining and inspecting the controller, the safety and
accident-prevention guidelines that apply to the specific project must be respected.
-
Only qualified personnel, who possess the required equipment and knowledge, are
permitted to perform activities on this controller. ‘Qualified personnel’ can be interpreted as:
people who are familiar with the installation, configuration, commissioning and operation of
electric door and gate installations. They must be capable of evaluating the whole
installation, recognizing potential dangers, and installing the required safety features.
-
Suitable and approved tools must be used when installing, commissioning, maintaining and
inspecting the controller.
-
The controller must be installed in the immediate vicinity of the door that is to be operated.
A good view of the door opening must be guaranteed when doing so.
-
Only use safety products that comply with the applicable norms. Examples include: safety
edges, photocells, smoke detectors and heat detectors.
-
People who do not possess enough experience cannot use this device unless they are being
supervised or have received instructions about how the device can be used in a safe manner,
and understand the accompanying risks.
-
Pay special attention to preventing risks that could lead to injury if people become crushed
between components that are operated by the automated system and the stationary
surrounding components; children must be supervised to ensure that they do not play with
the equipment. The controller cannot be used for moving parts with a pass door, unless it
can only be operated when the pass door is in safety mode.
If used for other purposes, please contact the supplier.
1.2
Forbidden use
The manufacturer accepts no liability for damage that has been caused by operation and connection
errors, failure to comply with the user manual or sub-standard maintenance and/or service, and once
again draws attention to dangerous situations that could be encountered as a result. Despite
