Mertz Boxer 999-935, Operator'S Manual

Page: 31 / 84

3-5
Pre-Start Inspection and Operation
8. Grease pivot shafts with proper type of grease. There are 14 grease points on this machine,
see Figure 3–5 .
Before starting the engine:
• Move all hydraulic control levers forward and release the lever. Make sure that
each lever automatically returns to the Neutral position.
• Move all hydraulic control levers rearward and release the lever. Make sure that
each lever automatically returns to the Neutral position.
• The Auxiliary Control Lever will remain in either the Forward or Reverse position
detents until it is manually moved to the Neutral position.
• If any of the levers, other than the Auxiliary Control Lever, does not automatically
return to the Neutral position, DO NOT use the machine until repairs have been
completed.
CAUTION