Mertz Boxer 999-935, Operator'S Manual

Page: 11 / 84

1-1
Section 1 – Safety Precautions
Since Mertz Manufacturing has no direct control over machine application or operation,
following the proper safety practices is the responsibility of the owner and/or operator.
Remember that this unit is only as safe as those who operate it. Safety tips shown throughout
this Operator's Manual must be followed at all times.
GENERAL SAFETY
•
Never operate the Boxer without first completely reading and understanding this Owner’s
Manual.
•
Only authorized, qualified, and trained personnel are allowed to operate this machine.
•
Never operate the machine under the influence of alcohol, awareness altering drugs, or
medications that would affect your ability to operate safely.
•
KEEP CHILDREN CLEAR FROM THE WORK SITE AREA AT ALL TIMES!
•
NEVER ALLOW A CHILD TO OPERATE OR RIDE ON THE MACHINE
•
Serious injury or death involving children can occur. Stay ALERT and be aware of your
surroundings at all times. Stop operations if children wander onto the job site. Resume work
only when the operating area is clear.
•
Keep all non-operating personnel away from the machine during operation.
•
Passengers must never be allowed to ride on the machine or any attachment.
•
Wearing protective clothing and gear, such as hard hats, safety glasses, safety shoes, hearing
protection, breathing protection, and long pants and shirts is highly recommended. Do not
operate in clothing or shoes which will expose skin or feet to possible flying debris.
•
Clothing should be relatively close fitting. Loose clothing, rings, and other jewelry should be
avoided because of the danger of catching them on machine parts or controls or on any
rotating parts, either on the machine or any attachment.
•
Keep hands/fingers clear from all rotating parts.
•
Never touch engine parts or machine components while they are hot.
•
Always perform the “Standard Shut Down Procedure” shown in this manual, if the unit will
be left unattended for any length of time.
•
Use only original Mertz or approved replacement parts and attachments. Imitation parts may
lead to unit damage and/or injury to personnel. The machines’ warranty may be voided if
unauthorized parts and attachments are used.