background image

 

 

-2- 

 

U.motion Client Touch 10 / 15 

Technical Manual 

 

S

AFETY INSTRUCTIONS

 

 
The present operating instructions contain  those safety instructions that are required to safely operate the 
machine. 
 
All  persons  working  with  the  machine  must  heed  the  present  operating  instructions,  especially  the  safety 
instructions. 
 

In addition, all local stipulations governing the prevention of accidents must be heeded. 
 
Only trained and authorized personnel may install and operate the machine. 
 
Proper application: The machine has been designed for application in a building environment. 

 
The  machine  meets  the  requirements  of  the  EMC  guidelines  and  of  the  harmonized  European  standards. 
Modifications to the machine hardware may affect the system’s EMC compatibility. 
 
Without special protection measures, the machine must not be used in EX areas and in plants that require 
special monitoring. 
 
Danger of explosion. Do not expose the buffer batteries to heat. Serious injury may be the result. 
 
The  operating  voltage  of  the  machine  must  be  within  the  specified  range!  The  product  label  provides  the 
required information. 

 

Summary of Contents for Touch 10
























Reviews: