-13-
U.motion Client Touch 10 / 15
Technical Manual
BACKUP/RESTORE
Permits to reset the database to factory settings
DATE/TIME
Permits to configure date/time of the device and all date/time related settings
DISPLAY
Allows the configuration of the screensaver and display power-off settings of the
device. Additionally the calibration of the touchscreen can be started from within
this settings page.
The following chapters will describe the single options in detail:
C7.1 Language
This page allows the configuration of the language that should be used for the configuration area of
U.motion Client Touch. Select the desired language and click on "SAVE". Once the storage procedure is
completed, the page will be refreshed and displayed in the selected language. TAKE CARE: the language
shown within the visualisation is not defined by the settings of the U.motion Client Touch, but by the settings
of the connected U.motion KNX Server Plus.
C7.2 Network
This page allows the configuration of the network parameters of U.motion Client Touch:
