-20-
U.motion Client Touch 10 / 15
Technical Manual
Normally after the initial loading process a login window is shown, through which the U.motion Client Touch
must register on the connected server:
To do so, simply highlight the box named "USERNAME" and enter the username with which you want to
login. Select the field "PASSWORD" and enter the password corresponding to the entered user name. Finally
click on LOGIN in order to access the visualisation.
A software keyboard will appear on the screen, through which username and password can be entered on the
touch screen of U.motion Client Touch (with the finger).
Please note that this login window doesn’t accept the local user of the U.motion Client Touch, but requires a
valid user of the connected U.motion KNX Server Plus. If the configuration of the connected server already
contains a user which was configured using the “trusted IP” setting (pointing to the IP address of the
U.motion Client Touch), the login window will not be shown and U.motion Client Touch will directly show the
home page of the visualisation.
Further information about the configuration and usage of the contents of the visualisation can be found in
both the installation and user manual of U.motion KNX Server Plus.
