Lap-Shoulder Belt Installation—Long Route, Contin-
ued
9. Route the free end of the
EZ-Tether Connector
Strap, which was left
hanging in Step 2, over the
shoulder portion of the lap-
shoulder belt and insert it
through the slot in the side
wall (Figure J) and secure it
on the outside of the
restraint (Figure K). The
EZ-Tether Connector
Strap must secure the
shoulder portion of the
seat belt in place as shown
in Figure L.
10. Remove slack from the lap
belt portion of the lap-
shoulder belt by pulling up
on the lower end of the
shoulder portion (Figure
M).
Note: Proceed to Step 11
on the next page.
Page 32
J
K
L
M
