Go Rhino dominator 2 series Assembly/Installation Instructions Download Page 1

Page: 1 / 5

QTY

PARTS DESCRIPTION

3/8” FLAT WASHERS

3/8” HEX NUTS

3/8” x 1 “ HEX BOLTS

3/8” LOCK WASHERS

QTY

PARTS DESCRIPTION

F05 FRONT MOUNTING BRACKETS

F06 CENTER AND REAR MOUNTING BRACKETS

D24125P PASSENGER SIDESTEP

D24125D DRIVER

SIDESTEP

INSTALLATION INSTRUCTIONS

STEP 1.

Read the instructions completely before you begin the installation.

If the vehicle is equipped with factory running boards, remove boards and fasteners.

DOMINATOR 2 SERIES SIDESTEPS

ASSEMBLY & INSTALLATION INSTRUCTIONS for PART NO. D24125

97-04 FORD F-150 HERITAGE SUPER Cab

97-98 FORD F-150 3DR SUPER CAB P/U 2/4WD

99-03 FORD F-150, F-250 LD 4DR SUPER CAB P/U 2/4WD

Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!

FRONT BRACKET MOUNTING HOLES

CENTER AND REAR BRACKET MOUNTING HOLES

Summary of Contents for dominator 2 series

Page 2: ...ower body pinch mold for the front mounting bracket STEP 4 Loosely attach the flange of the front mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts as shown FO5 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT PASSENGER SIDE LOWER BODY PINCH MOLD F05 FRONT BRACKET MOUNTING HOLES ...

Page 3: ... the center mounting bracket STEP 6 Loosely attach the flange of the mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts F06 CENTER BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Page 4: ...racket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts STEP 9 Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets using the 3 8 x 1 hex bolts washers and nuts as shown F06 REAR BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Page 5: ...the body and then tighten all mounting bracket and sidestep nuts and bolts STEP 11 Repeat the above steps to install the driver side mounting brackets and sidestep MOUNTING BRACKET 3 8 X 1 HEX BOLTS WASHERS NUTS PASSENGER SIDESTEP ...