Go Rhino dominator 2 series Assembly/Installation Instructions Download Page 4

Page: 4 / 5

STEP 7.

Locate the holes in the lower body pinch mold for the rear-mounting bracket.

STEP 8.

Loosely attach the flange of the mounting bracket to the bottom of the lower body pinch mold using the

3/8” x 1” hex bolts, washers, and nuts.

STEP 9.

Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets using the

3/8” x 1” hex bolts, washers and nuts as shown.

F06 REAR BRACKET

MOUNTING HOLES

F06 MOUNTING BRACKET

3/8” X 1” HEX BOLT WASHERS & NUT

Summary of Contents for dominator 2 series

Page 2: ...ower body pinch mold for the front mounting bracket STEP 4 Loosely attach the flange of the front mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts as shown FO5 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT PASSENGER SIDE LOWER BODY PINCH MOLD F05 FRONT BRACKET MOUNTING HOLES ...

Page 3: ... the center mounting bracket STEP 6 Loosely attach the flange of the mounting bracket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts F06 CENTER BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Page 4: ...racket to the bottom of the lower body pinch mold using the 3 8 x 1 hex bolts washers and nuts STEP 9 Position the passenger sidestep up to the mounting brackets and loosely attach it to the brackets using the 3 8 x 1 hex bolts washers and nuts as shown F06 REAR BRACKET MOUNTING HOLES F06 MOUNTING BRACKET 3 8 X 1 HEX BOLT WASHERS NUT ...

Page 5: ...the body and then tighten all mounting bracket and sidestep nuts and bolts STEP 11 Repeat the above steps to install the driver side mounting brackets and sidestep MOUNTING BRACKET 3 8 X 1 HEX BOLTS WASHERS NUTS PASSENGER SIDESTEP ...