Page 30
Lap-Shoulder Belt Installation—Long Route—
Preferred Method—Tether Optional
1. Determine which side
of the restraint that
the shoulder portion
of the lap-shoulder belt
will be next to.
2. Grasp the EZ-Tether
Connector Strap and
install one end to the
back of the restraint
(Figures A, B, and C)
on the same side as
the shoulder portion
of the lap-shoulder
belt. Allow the other
end to hang free for
now (Figure D).
3. Place the restraint on
the vehicle seat. If the
tether is attached to
the restraint for use,
lay it over the vehicle
seatback to avoid
“trapping” it between
the restraint and
vehicle seat (Figure E).
Note:
The lap-shoulder long belt route is the only installa-
tion for which the tether(s) is optional. If the tether (or
tethers) are not in use, then they must be removed from
the restraint and stored in the trunk, glove box, or inside
the house.
Warning:
Tether straps may pose a strangulation hazard.
Please store them out of reach of young children.
A
B
C
D
E
