Page 22
Adjusting the Buckle, Continued
7. Insert the buckle anchor
through the slot in the plastic
shell for
position 2
(See arrow,
Figure G). The fabric cover is
removed for clarity.
8. Pull the buckle anchor
through the slot in the plastic
shell and out of the bottom
side of the restraint (Figure
H).
9. Release the buckle anchor and
verify that it is laying flat
against the plastic shell (Figure
I).
10. Make sure that the harness
adjuster strap is routed over
the buckle anchor (Figure I).
Note: To remove the buckle,
perform Steps 6-8 in reverse.
Position 2
Position 2
Buckle
Anchor
Harness
Adjuster
Strap
G
H
I
