Advanced tips
Specifying the serial port
• Click the
Options…
button on the
Pre-calibration
store page
to display the
Comms Port
panel on the
Options
dialogue box:
• Select the port you want to use and click the
OK
button.
Q u i c k t o u r
2 1
Pre-calibration store
The
Pre-calibration Store
page stores the settings you
have created to the G68 Digital Surround Controller and then
automatically starts the calibration sequence so you can tune your
speakers by ear using a series of listening tests.
To connect the serial cable
• Connect one end to the RS232 connector on the back panel of
the controller in your system.
• Connect the other end to one of the serial ports on your
computer.
The default is COM1. If you have to use a different port see
Advanced tips below.
• Click the
Start
button to begin.
When the store has completed successfully the calibration
procedure will start automatically and you will hear a noise signal
from the first speaker in your layout. Refer to the
G Series Digital
Surround Controller Installation Guide for information about
calibrating your system.
• Click the
Next
link in the Breadcrumb trail to proceed to the next
page.
Summary of Contents for Configuration Program
Page 1: ...Meridian Configuration Program Guide...
Page 4: ...C o n t e n t s i v...
