R o o m
c o r r e c t i o n
4 4
After building the filters for a profile you can edit the filters
numerically or graphically to adjust their parameters, or change the
response of each filter.
Note:
This should only be attempted by users with an
understanding of filter design. It is strongly recommended that you
copy the profile first and then edit the copied profile. There is no
undo function within
Edit filters
.
To display the filters for a profile
• Select the profile in the
Active profiles
list.
• Click the
Edit filters…
button.
The following dialogue box shows a list of the channels, and a list
of the filters for each channel, together with the parameters for
each filter:
• Select the channel in the
Channel
list to display the filters for
that channel.
The columns give the filter number, centre frequency (Hz),
gain (dB), and filter bandwidth (Hz), and you can adjust these
parameters for each filter.
In addition, the list of filters shows the Room mode bandwidth
(Hz), Equalized bandwidth (Hz), RT60 (s), and Target RT60 (s).
To edit a filter numerically
• Select the filter in the
Filters
list.
• Adjust the frequency, gain, and width in the fields below the
Filters
list.
To edit a filter graphically
• Click the
Graphical
tab to display the
Graphical
panel in the
Edit filters
dialogue box.
• Select the channel in the
Channel
list to display the filters for
that channel in the Filter response graph:
Editing filters
Summary of Contents for Configuration Program
Page 1: ...Meridian Configuration Program Guide...
Page 4: ...C o n t e n t s i v...