Meridian Configuration Program, Configuration Manual

Page: 9 / 58

Q u i c k t o u r
5
Quick tour
This section is designed to give you a quick tour of the Meridian Configuration Program. It
shows how to create a complete configuration for a typical simple system.
At each stage the Quick tour shows information about some of the more advanced features of
the Meridian Configuration Program in grey tinted boxes.
Running the Configuration
Program
• Click Start , point at All Programs , Meridian , then click
Configuration Program :
The Welcome page will be displayed. This provides links to useful
information.
Using the Meridian Configuration
Program
The simplest way to use the Meridian Configuration Program is to
click the links in the Breadcrumb trail and Information bar at the
top of the window; for example:
The Breadcrumb trail shows a sequence of hyperlinks to pages you
have already visited; this is indicated by the blue underline. Clicking
one of the links takes you to the corresponding page to allow you
to check your settings on that page, or make changes. The last
entry on the Breadcrumb trail is usually Next , which takes you to
the next page.
The Information bar provides help about the current page, and
tells you what to do next. The Information bar contains two types
of hyperlink: definitions, prefixed by a question mark icon, which
display a pop-up window with a definition of the item, and jumps,
prefixed by an arrow icon, which perform an action or jump to
another page.