R o o m
c o r r e c t i o n
4 7
The newly created file will contain the profile labels and these
can be used to choose the profile you want to use with a given
preset. It will not contain measurements or profile data for the
Meridian Room Correction program. If you use the Meridian Room
Correction program to create new measurements and profiles and
store these to the digital surround controller, the old profiles will be
overwritten.
• Change the settings as required and store the new settings to
the digital surround controller.
For more information about changing configuration settings using
the Meridian Configuration Program refer to the
G68 Digital
Surround Controller Installation Guide.
To change other settings directly on the digital surround
controller
For information about changing other configuration settings on
the digital surround controller refer to the
G68 Digital Surround
Controller Installation Guide.
After making changes on the digital surround controller you can
add these changes to an existing MSL file as follows:
• Run the Meridian Configuration Program and open the original
MSL file.
• On the
Products
page, click the controller with the right mouse
button, then click
Fetch…
on the context menu to fetch the
new settings from the digital surround controller.
If you want to keep the original settings:
• On the
File
menu, click
Save as
to save a copy of the MSL file
and mrd folder under a new name.
This will also create a renamed copy of the mrd folder containing
the original measurements and profiles.
Summary of Contents for Configuration Program
Page 1: ...Meridian Configuration Program Guide...
Page 4: ...C o n t e n t s i v...
