Merging Hapi MKII, User Manual

Page: 62 / 112

www.merging.com/hapi Page 62
HAPI MKII User Manual
Meters Settings Menu
Hot :
Sets the level above which the meter display will be red. If set to 0dB this will
mean clipping. Range -2dBFS to 0dBFS (PCM)
-2dB to 6dB SACD (DXD/DSD). Reminder: DSD users benefit from a +6dB
headroom in DSD with distortion starting slightly and progressively from
+3.1dB upwards and clipping once re6dB SACD
Alignment: Sets metering level alignment range (yellow leds). Range -24dBFS to 0dB
Decay integration time: Sets the rate at which the level meter display decays after the level falls below
the most recent Peak.
Peak Hold: If ON it will keep the red Peak Hold Overload in display
I/O Menu & Sync Sub-Menu (I/O)
The IO and Synchronization menu is where the user can select the source of the Hapi reference clock.
It is essential that these settings are configured correctly in order to ensure a clean audio signal through
the Hapi unit.
Reference Source Choose the desired sync source by selecting a Reference source.