Merging Hapi MKII, User Manual

Page: 28 / 112

www.merging.com/hapi Page 28
HAPI MKII User Manual
In this example case set the software attenuation to - 3 dB (see image below), so the overall result ends
up at 21 dBu for a Full Scale signal
The Hapi software Output Attenuation range is from -12dB to 0dB
How to connect the symmetrical line out to an unbalanced input
Never attempt to short pin 3 (or pin 2) to Ground on Horus DA's output, since the Horus Line Out driving
circuitry is symmetrical but not floating.
Furthermore, as Unbalanced Inputs are traditionally more sensitive than Balanced Inputs, the - 6dB
Analog level achieved by using only one of the Horus symmetrical outputs, will offer better signal level
adaptation with less risks of overdriving the Unbalanced Inputs connected to the Horus.