Merging Hapi MKII, User Manual

Page: 45 / 112

www.merging.com/hapi Page 45
HAPI MKII User Manual
Sync breakout cable pin-out
Connecting the RAVENNA Ethernet cables
The RAVENNA ports (Primary and Secondary) are RJ45 female receptacles.
Simply line up the RJ45 cable with the slot on the rear of the Hapi unit and
slide it into place until it clicks into its locked position.
(Category 5E or 6)
Note: Use the primary (PRI) port. Secondary port behavior depends on the
ST2022-7 mode, set in the Hapi Advanced pages (default mode: network
switch mode). See Network menu
– Network operations modes for details.