Merging Hapi MKII, User Manual

Page: 71 / 112

www.merging.com/hapi Page 71
HAPI MKII User Manual
Unrouted:
No internal routing has been performed, the module remains available for
RAVENNA and/or internal routing
ADAT/SPDIF:
Sets the module being configured to receive signal from the ADAT/SPDIF
AES:
Sets the module being configured to receive signal from a bank of AES-EBU
inputs.
MADI:
Enables the module being configured to receive signal from any 8-channel
bank in either of the MADI streams
PT N:
Enables the module being configured to receive signal from any 8-channel
bank in either of the PT64 modules.
A/D N:
Sends the signal coming in from the Mic or Line input modules to the output
module being configured
Loopback: Should only be used for test purposes.
Routing Example:
MADI Routing Output: Users can route literally any input signal to any output module. Users can also
route any input signal to any combination of output modules. Signals are
routable in blocks of 8 channels.
The example picture below shows the MADI output1-8 routing being selected
from the Routing page on the ADA8 module channels 1-8
With Hapi MKII single channel routing is supported but has to be performed via the RAVENNA
Advanced pages. For more information refer to the Advanced Pages online guide.
https://confluence.merging.com/pages/viewpage.action?pageId=33260125