Merging Hapi MKII, User Manual

Page: 83 / 112

www.merging.com/hapi Page 83
HAPI MKII User Manual
HAPI MKII - Web Control Access
Installing and accessing the Hapi Control interface remotely
To control and view your Hapi remotely with a web browser make sure that you are using one of the
Internet browsers below: Google Chrome (Highly Recommended), Mozilla Firefox, Opera, Apple
Safari, Microsoft Edge. * Microsoft Internet Explorer is not supported *
Then take the following steps:
1) If you did not install Pyramix or Ovation proceed from step 2 to 3. If you have already installed a
Pyramix / Ovation go directly to step 4)
2) Download either ANEMAN or the MTDiscovery.exe application to your system (PC or MAC
installers are available)
https://www.merging.com/products/interfaces/downloads
3) Make sure your Hapi is connected to the same network as your system, and is configured with
the correct IP
settings (See “Setting up the Hapi IP Address”)
4) Launch the MT Discovery tool (MTDiscovery.exe) or ANEMAN (Aneman.exe)
Any Hapi devices on the network will be discovered by the MT Discovery tool or ANEMAN and will
appear under the
“RAVENNA Devices”
- A mouse double-click on the Hapi Device entry will open the Hapi Web Interface in your default
web browser
- Only Devices on the same network (same color in display) can have their I/O interconnected
-
*Microsoft Internet Explorer is not recommended for this*
Using the Webpage, you can browse the Menus and change parameters in exactly the same manner
as on the front panel TFT of the Hapi unit in question.
Warning: It is mandatory that you connect the Hapi to a Gigabit Ethernet Port or Switch for remote
access.