Merging Hapi MKII, User Manual

Page: 56 / 112

www.merging.com/hapi Page 56
HAPI MKII User Manual
HAPI MK II - Power ON
Connecting the Power Cable
The Hapi unit runs on 85-240V, 50-60 Hz AC voltage. Excessive voltages can seriously damage the
Hapi unit, so make sure that your AC power matches the voltage of your Hapi unit. When you connect
the power, use the cable you received with your Hapi unit and plug it into a grounded outlet.
For safety and EMC reasons, and to prevent audio hum, the system must be properly grounded. If your
power source does not have a standard three-prong socket, the system must be grounded in another
appropriate manner.
As an option Hapi can also be powered from a DC power source (10-14V), contact your local reseller
about this option.
Hapi DC power input
Hapi can be delivered with a DC input capability, when this option is ordered a 4 pins connector
(HR10A-7R-4S) is installed left to the AC power connector. The mating part which is also delivered is a
Hirose HR10-7P-4P.
The pinout of this connector is:
-
Pin 1: GND
-
Pin 4: 12V
-
Pins 2 and 3: not connected
The DC power input accepts voltages from 10V to 14V for a maximum power consumption of 30W.
As an option, Merging does also provide an external AC/DC 30W converter with the appropriate
counter-part connector already mounted. Its product code is PSU-AC/DC-30W.