Once the trolling motor is in anchor mode, the anchor position can be adjusted
by pressing the
left turn, right turn, increase speed (+), or decrease speed
(–)
buttons. Pressing any of these buttons once will adjust the anchor position
by five feet in the direction selected, relative to the boat's heading. For
example, pressing the
+
button once will move the anchor position forward of
the bow by five feet.
!
CAUTION
Avoid injury or property damage due to unintended operation. Certain objects
—especially magnetic metal objects, such as anchors—can affect the GPS
system if they are within or passing through the magnetic field surrounding
the trolling motor. Objects obstructing the GPS signal can also have a
negative effect on system operation. Be mindful of objects close to the trolling
motor, and use care when operating the trolling motor in a GPS‑guided
mode.
NOTE: Pressing a button multiple times will move the anchor position five feet
for each time the button is pressed.
Storing or Overwriting an Anchor Position
a -
Memory buttons (1–8)
NOTE: An anchor position can be stored or overwritten from any operating
mode except route record mode.
To store an anchor location, press and hold any of the numbered
memory
buttons for two seconds. The unit will emit a tone to indicate that the anchor
position has been stored successfully.
Stored anchor positions cannot be erased, but you can overwrite (record over)
them. A stored anchor position can be overwritten by simply storing a new
anchor position to the desired
memory
button.
Recalling a Stored Anchor Position
NOTE: A stored anchor position can be recalled from any operating mode.
54420
a
TROLLING MOTOR INSTALLATION AND OPERATION
46
eng