2. Connect the middle male port to the NMEA 2000 cable that is coming out
of the Tour Pro foot pedal.
a -
NMEA 2000 cable
b -
NMEA 2000 T‑connector
3. Attach the T‑connector to an existing NMEA 2000 network backbone. If
no existing network exists, purchase MotorGuide NMEA 2000 Starter Kit
(Part #8M0107522).
4. Use a termination resistor to cap off the remaining open connector end of
the T‑Connector if it is the last T in a NMEA 2000 network.
Connecting the Sonar Display to the Trolling Motor
NOTE: This procedure applies only to models equipped with integrated HD+
universal sonar.
This sonar display connection procedure applies to trolling motor models with
internal sonar that offer built‑in 83/200 and 455/800 kHz HD+ universal sonar
transducers compatible with Garmin®, Humminbird®, Lowrance®, and
Raymarine® brand sonar displays. For compatibility with other sonar units,
refer to www.motorguide.com.
a
b
70279
TROLLING MOTOR INSTALLATION AND OPERATION
26
eng