NOTE: The first Allen screw may come loose while tightening the second Allen
screw.
9. Tighten one of the two Allen screws to the specified torque. Then tighten
the second Allen screw to the specified torque. When the second Allen
screw is tightened, verify that the first Allen screw is still tightened to the
specified torque.
Description
Nm
lb‑in.
lb‑ft
Allen screws (2)
16.3
144
–
a -
Allen screws
b -
360 breakaway housing aligned with the
top of the mount
Trolling Motor Installation
IMPORTANT: Mount the motor as far forward on the boat as possible.
Make sure there is nothing obstructing the stowing or deploying of the motor in
and out of the water.
Make sure there are no obstructions underneath the mount.
1. Stow the fully assembled motor by pulling on the stow/deploy handle and
raising the motor into the stowed position.
a
b
b
70008
TROLLING MOTOR INSTALLATION AND OPERATION
18
eng