HURTH V-DRIVE TRANSMSSION
SERVICE MANUAL NUMBER 23
Page 8D-4
90-861326--1 MARCH 1999
IMPORTANT: Transmission propeller rotation is determined by the shift cable instal-
lation in the remote control.
•
RIGHT-HAND PROPELLER ROTATION - Control cable will have to be installed in re-
mote control so that cable end will move in direction “A” when shift handle is placed in the
forward position.
•
LEFT-HAND PROPELLER ROTATION - Control cable will have to be installed in
remote control so that cable end will move in direction “B” when shift handle is placed in
the forward position.
23242
A
B
Shift Cable Installation and Adjustment
IMPORTANT: Check that shift lever is positioned approximately 10
°
aft of vertical as
shown when in the neutral detent position. Also, ensure that the distance between
studs in the following is set at 7-1/8 in. (181 mm). If necessary, loosen clamping bolt
and position lever so that dimension (c) is as shown when in the neutral detent posi-
tion, and retighten clamping bolt.
72958
a
c
d
50228
a
b
d
Typical Hurth Transmission Shown
a -
Shift Lever
b -
Lever, In Neutral Detent, Must Be Approximately 10 Degrees Aft Of Vertical
c -
Dimension Between Studs - 7-1/8 In. (181 mm)
d -
Clamping Bolt
Downloaded from
https://needmanual.com/
Index
