MAINTENANCE
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999
Page 1B-33
TRANSMISSION COLD
NOTE: For ease of checking the oil prior to engine start-up, a cold oil level mark can be
made. To find the cold oil level mark, the oil level must first be set according to the warm oil
level checking procedure.
1. Let the boat sit overnight. Insert clean dipstick and read level.
2. Put a mark on the dipstick at the cold oil level.
NOTE: You can use the new mark to check the oil level when cold. If oil level adjustment
is needed, add oil to the new mark. This procedure can be performed by the builder, dealer
or owner to ease fluid checking procedure.
Lubrication
Throttle Cable
MCM AND MIE MODELS
72791
a
b
a
454 / 502 Mag / 8.2L MPI Models
75454
b
a
7.4L MPI Models
a -
Pivot Points
b -
Guide Contact Surface
Downloaded from
https://needmanual.com/
Index
Index
