Mercury 15 EFI FourStroke, Service Manual

Page: 371 / 406

5. Insert the lanyard stop switch through the tiller handle housing and secure it from below with a plastic nut. Tighten the nut
to the specified torque.
a - Lanyard stop switch
b - Nut
Description Nm lb‑in. lb‑ft
Plastic nut 2.0 17.7 –
6. Apply 2‑4‑C with PTFE to the shift cable input rod and eyelet.
Tube Ref No. Description Where Used Part No.
95
2-4-C with PTFE Shift cable input rod and eyelet 92-802859A 1
7. Place the shift cable in the retaining slot, and attach the shift cable to the shift handle with a locknut.
8. Thread new cable ties in the cable tie mounts.
9. Install the throttle handle:
a. Position the throttle cable pulley housing.
b. Install the friction clamp on the throttle handle shaft.
c. Slide the throttle handle partially over the end of the tiller handle chassis.
a
b
63441
Tiller Handle
Page 7B-14 © 2018 Mercury Marine 90-8M0125265 eng NOVEMBER 2017