MerCruiser 350 Magnum MPI Operation & Maintenance Manual Download Page 39 | Manualshive

Page: 39 / 76

background image

37

CC152

Changing Fluids

See MAINTENANCE CHART for lubricant change frequency. Lubricant should be changed before placing boat
in storage.

Transmission fluid should be changed at specified intervals by your Authorized MerCruiser Dealer.

CHANGING CRANKCASE OIL AND FILTER

IMPORTANT: Change oil when engine is warm from operation. Warm oil flows more freely, carrying away
more impurities. Use only recommended motor oil (see SPECIFICATIONS).

1

With engine at normal operating temperature, remove oil drain hose that is connected near the engine thermo-

stat housing. Remove fitting from end of hose. Lower hose into appropriate container and allow oil to drain. When
oil has drained completely, reinstall fitting in end of hose and and secure hose to engine using the attached clip.

2

Turn oil filter counterclockwise (to left); remove and discard old oil filter and old sealing ring. Coat sealing ring

on new filter with motor oil. Install new sealing ring and filter by turning clockwise (to right). Tighten filter securely.
Do not overtighten.

3

Remove oil filler cap. Add correct type oil (see SPECIFICATIONS) to bring level up to, but not over FULL mark

on dipstick.

IMPORTANT: Always use dipstick to determine exactly how much oil is required.

«
...
37
38
39
40
41
...
»

Summary of Contents for 350 Magnum MPI













































































Reviews:

No comments

Related manuals for 350 Magnum MPI

Brand: Man Pages: 136

Brand: Nice Pages: 23

Brand: Sole Diesel Pages: 40

Brand: RCV Pages: 4

Brand: Lenze Pages: 76

Brand: Mile HaoXianG Model Technology Pages: 3

Brand: Yamaha Pages: 76

Brand: Yamaha Pages: 72

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 99

Brand: Yamaha Pages: 128

Brand: Yamaha Pages: 135

Brand: Yamaha Pages: 144

Brand: Yamaha Pages: 162

Brand: Yamaha Pages: 180

Brand: Yamaha Pages: 186

Brand: Yamaha Pages: 194

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands