MerCruiser 350 Magnum MPI Operation & Maintenance Manual Download Page 41 | Manualshive

Page: 41 / 76

background image

39

CC51

Lubrication

THROTTLE CABLE

1

Lubricate pivot points with specified motor oil.

CC319

SHIFT CABLE

2

Lubricate pivot points with specified motor oil.

3

Lubricate poppet ball and holes in lever with specified motor oil.

IMPORTANT: Poppet Ball MUST BE centered in detent hole for each F-N-R position.

4

Shift lever must be over this letter when propelling boat FORWARD.

IMPORTANT: Remote control, shift cable and linkages, must position transmission shift lever so that it
is fully in the forward and reverse gear detent positions with the lever over the letter “F” on transmission
case when propelling boat forward. IMPROPER POSITIONING OF SHIFT LEVER MAY CAUSE TRANSMIS-
SION TO FAIL. Damage caused to transmission as a result of improper shift lever positioning will not be
covered by Velvet Drive Transmission Warranty.

To obtain service and/or parts literature for your Velvet Drive transmission, contact:

Velvet Drive
Marine and Industrial Transmissions
Theodore Rice Boulevard
Industrial Park
New Bedford, MA 02745
U.S.A

«
...
39
40
41
42
43
...
»

Summary of Contents for 350 Magnum MPI













































































Reviews:

No comments

Related manuals for 350 Magnum MPI

Brand: Kubota Pages: 138

Brand: YASKAWA Pages: 447

Brand: Saito Pages: 2

Brand: TCF Pages: 16

Brand: Champion Pages: 72

Brand: BAFANG Pages: 6

Brand: WÜRGES Pages: 24

Brand: Hacker Pages: 2

Brand: Hacker Pages: 7

Brand: Hacker Pages: 8

Brand: Hacker Pages: 8

Brand: YS Pages: 2

Brand: Yanmar Pages: 184

SOLIDline-MOR GU4510

Brand: GEIGER Pages: 8

Brand: Yanmar Pages: 213

Brand: KRESS Pages: 16

Brand: B&R Pages: 98

Brand: Yanmar Pages: 263

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands