MerCruiser 350 Magnum MPI Operation & Maintenance Manual Download Page 47 | Manualshive

Page: 47 / 76

background image

45

CC277

Sight Tube Inspection

1

The engine is equipped with fuel system sight tubes which provide a visual indication of a problem in the fuel

delivery system. There is one coming from the mechanical fuel pump and one coming from the vapor seperator
tank. Both of the tubes are joined together and drain into the intake manifold. If there is fuel visible in the sight tube,
have your engine repaired by an Authorized MerCruiser Dealer immediately.

A. Fuel Pump Sight Tube - See Illustration

B. Vapor Seperator Tank Sight Tube - See Illustration

CC159

Water Separating Fuel Filter

!

WARNING

Be careful when changing water separating fuel filter. Gasoline is extremely flammable and highly explo-
sive under certain conditions. Be sure ignition key is OFF. Do not smoke or allow spark or open flame in
area when changing fuel filter. Wipe up any spilled fuel immediately. Make sure no fuel leaks exist before
closing engine hatch.

2

Remove water separating fuel filter (by turning counterclockwise) and sealing ring from mounting bracket and

discard.

Coat sealing rings on new filter with motor oil. Thread filter clockwise onto bracket and tighten securely by hand.
Do not use a filter wrench.

Start and run engine. Check filter connection for gasoline leaks. If leaks exist, recheck filter installation. If leaks
continue, stop engine immediately and contact your Authorized MerCruiser Dealer.

CC366

In-Line Fuel Filter

3

The in-line filter is located in the aft end of the starboard fuel rail. Replace every year or 100 hours of operation

whichever occurs first.

«
...
45
46
47
48
49
...
»

Summary of Contents for 350 Magnum MPI













































































Reviews:

No comments

Related manuals for 350 Magnum MPI

Brand: Eaton Pages: 24

Brand: brel-motors Pages: 2

Brand: Texas Equipment Pages: 25

Brand: Canaline Engines Pages: 39

Brand: Louvolite Pages: 4

IntelliGear Plus

Brand: Browning Pages: 20

Brand: Honda Pages: 4

Brand: Honda Pages: 48

Brand: Honda Pages: 71

Brand: Honda Pages: 80

Brand: Baumuller Pages: 23

Brand: Baumuller Pages: 19

Brand: Baumuller Pages: 31

Brand: Briggs & Stratton Pages: 6

Brand: Wood-mizer Pages: 197

Brand: Wood-mizer Pages: 13

Brand: Vetus Pages: 100

Brand: Vetus Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands