P 5
Please retain product label and instructions for future reference
Step 6
(See Pre-Assembly)
Parts needed -
No. 6 QTY 6
No. 7 QTY6
No. 8 QTY 6
No. 9 QTY 6
No. 10 QTY 14
No. 11 QTY 7
No. 12 QTY 7
Following the same method
outlined in
Pre-Assembly
, lay
the next Log Boards (
No’s. 6, 7,
8, 9, 10,11 & 12
) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 8.
***Please Note:
The short boards placed
to create the opening’s for the doors &
windows can be placed either side
depending on your needs.
6
9
7
8
10
10
12
11
Step 5
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frames for
the double door and storage door
(No. 2 & 3)
over the boards resting the
frame on top of the starter board.
*Please note:
This image is for illustra -
tive purposes and may differ from
your choice in product (
regarding
door position
). Nevertheless the
process of fitting the door frame is
the same.
**Please Note:
The short boards at
the
front of the building (either side of
the door and window opening’s) can
be placed either side depending on
your needs.
