Mercedes-Benz S-Class Cabriolet 2017, Owner'S Manual

Page: 420 / 525

#
Do not alter the engine oil or oil filter in
order to achieve longer change intervals
than prescribed.
#
Do not use additives.
#
Have the engine oil renewed at regular
intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Only Mercedes-Benz approved engine oils may
be used in Mercedes-Benz engines.
Further information on engine oils and oil filters:
R
in the Mercedes-Benz Specifications for
Operating Fluids at http://bevo.mercedes-
benz.com (by entering the designation)
R
in the Mercedes-Benz Specifications for
Operating Fluids in the Mercedes-Benz BeVo
app (by entering the designation)
R
at a qualified specialist workshop
Petrol engines: for certain countries, different
engine oils can be used in conjunction with
reduced maintenance intervals.
% Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Model MB-Freigabe or MB-
Approval
S 560 229.52, 229.61
If the engine oils listed in the table are not avail‐
able, you may add a maximum of 1.0 l of the fol‐
lowing engine oils once only:
R
MB-Freigabe or MB-Approval 229.3 or
ACEA A3/B3
The following values refer to an oil change,
including the oil filter.
Replacement amount
Model Replacement
amount
S 560 9.0 l
Notes on brake fluid
Observe the notes on operating fluids
(
→
page 414).
& WARNING Risk of an accident due to
vapour pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapour pockets may form in the brake sys‐
tem when the brakes are applied hard.
This impairs the braking effect.
#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly changed at a quali‐
fied specialist workshop.
Only use brake fluid approved by Mercedes-Benz
according to MB-Freigabe or MB-Approval 331.0.
Technical data 417