Mercedes-Benz S 450 2020, Operator'S Manual

Page: 443 / 602

#
Press and hold button 1 for at least five
seconds.
The vehicle is adjusted to the height of the
last active drive program. Indicator lamp 2
goes out.
#
Drive the vehicle off the transporter.
4MATIC vehicles
#
Make sure that the front and rear axles come
to rest on the same transportation vehicle.
* NOTE Damage to the drivetrain due to
incorrect positioning
#
Do not position the vehicle above the
connection point of the transport vehi‐
cle.
Towing eye storage location
Towing eye 1 is located with the vehicle tool kit
under the trunk floor.
Installing the towing eye
#
Press the mark on cover 1 inwards and
remove.
#
Screw in the towing eye clockwise as far as it
will go and tighten.
% Make sure that cover 1 engages in the
bumper when you remove the towing eye.
Breakdown assistance 441