Mercedes-Benz S 450 2020, Operator'S Manual

Page: 154 / 602

High beam
#
To switch on: turn the light switch to the
L or à position.
#
Push the combination switch beyond the
point of resistance in the direction of arrow
1 .
When the high beam is activated, the L
low beam indicator lamp will be deactivated
and replaced by the K high beam indica‐
tor lamp.
#
To switch off: move the combination switch
back to its starting position.
High-beam flasher
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
Indicator operation activated by the driver
can extend for the duration of the lane
change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Activating/deactivating the hazard warning
lights
#
Press button 1 .
The hazard warning lights will switch on auto‐
matically if:
R
The airbag has been deployed.
152 Light and visibility