Mercedes-Benz S 450 2020, Operator'S Manual

Page: 227 / 602

ing. Once the system is passive, symbol 1 is
shown as gray in the multifunction display.
Function of Hill Start Assist
Hill Start Assist holds the vehicle for a short
time when pulling away on a hill under the fol‐
lowing conditions:
R
The transmission is in position h or k .
R
The electric parking brake is released.
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and depress it before the vehicle begins to roll
away.
& WARNING Risk of accident and injury
due to the vehicle rolling away
After a short time, Hill Start Assist no longer
holds the vehicle and it can roll away.
#
Therefore, swiftly move your foot from
the brake pedal to the accelerator
pedal. Never attempt to leave the vehi‐
cle if it is being held by Hill Start Assist.
HOLD function
HOLD function
The HOLD function holds the vehicle at a stand‐
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsi‐
bility for the vehicle safely standing still remains
with the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
R
The incline must not be greater than 30%.
Activating/deactivating the HOLD function
& WARNING Risk of an accident due to the
HOLD function being activated when you
leave the vehicle
If you leave the vehicle while only the HOLD
function is braking the vehicle, the vehicle
can roll away in the following situations:
R
If there is a malfunction in the system or
in the power supply.
R
If the HOLD function is deactivated by
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant.
#
Always deactivate the HOLD function
and secure the vehicle against rolling
away before leaving the vehicle.
Driving and parking 225