Mercedes-Benz S 450 2020, Operator'S Manual

Page: 139 / 602

#
To open: press down cup holder base 2 in
the middle until it engages.
#
To close: press closing button 1 .
% The cup holder insert can be removed for
cleaning, e.g. using clean, lukewarm water.
Removing and installing the cup holder
insert in the rear armrest (vehicles with elec‐
trically adjustable rear seats)
Removing the insert
* NOTE Damage to the wooden trim
The wooden trim can be damaged by pulling
out the cup holder insert.
#
Do not pull the cup holder insert out
from the rear armrest any farther than
0.6 in (15 mm).
#
Press down cup holder base 3 in the middle
until it engages.
#
Press both retaining clips 2 and pull the
cup holder insert upwards approximately
0.6 in (15 mm).
#
Press button 1 .
Cup holder base 3 raises.
#
Remove the insert from the rear armrest
completely.
Installing the insert
*
NOTE Damage to the wooden trim
The wooden trim can be damaged by insert‐
ing the cup holder insert.
#
Make sure that the cup holder insert
has been inserted into the recess cor‐
rectly.
Seats and stowing 137