guide rails will no longer be parallel to one
another. The seat/berth combination can
then no longer be inserted and engaged.
Move the seat slider to the correct position
first in this case (
Y
page 88).
X
Fold the seat/berth combination back and
engage it.
Make sure that nobody becomes trapped
when tipping the seat/berth combination.
Handle
:
folds down towards the vehicle
floor. The seat/berth combination is locked in
place.
X
Connect power cable
;
and fasten the rotary
catch of the plug.
X
Move the seat/berth combination to the
desired position and lock into place
(
Y
page 27).
X
Fit the panel of the load compartment
enlargement.
X
Fit the stowage compartment.
Bed extension
Adjusting the berth position
X
Raised berth position: swing bed exten-
sion
:
to the desired position until locking
rail
;
engages.
X
Horizontal berth position: swing bed exten-
sion
:
to the uppermost position and back to
the horizontal position.
Folding up
X
Empty transport bag
:
.
X
Fold up the short section of bed extension
;
(
Y
page 31).
X
Turn knob
?
clockwise and, using the bar,
fold bed extension
=
up to the backrest of
the seat/berth combination.
X
Secure bed extension
=
to the right head
restraint using the retaining strap on the bar.
Removing/fitting
X
To remove: remove the camping chairs and
table (
Y
page 73).
X
Fold up bed extension
:
and lift it vertically
out of the brackets on the wall of the vehicle.
X
To fit: insert bed extension
:
into the brack-
ets on the vehicle wall and lower it carefully.
Separating the bed extension
To achieve an even, flat stowage space, the
short section of the bed extension can be
removed individually.
X
Open the zip and remove the short section of
the bed extension.
Marco Polo seat/berth combination
31
Seats, berths and table
Z
