Mercedes-Benz Marco Polo 2017 Owner'S Manual Supplement Download Page 38

Page: 38 / 96

Swing handle

up.

Make sure that nobody becomes trapped

when tipping the seat/berth combination.
The seat/berth combination is lifted at the

rear out of the guide rails and tips forwards.

Pull lever

;

up on all 3 legs of the seat/berth

combination.

The seat/berth combination is released.

Tip the seat/berth combination forwards

slightly and lift it out of seat sliders

Tip the seat/berth combination forwards

slightly and lift it at the front out of the guide

rails.

Fitting

WARNING

If the seat/berth combination is not fully
engaged, it may be thrown about while the
vehicle is moving. There is a risk of an acci-
dent and injury.
Always ensure that the seat/berth combina-
tion is engaged as described.

Always keep the seat anchorages in the vehicle

floor free from dirt and foreign objects. This

ensures that the seat/berth combination

engages securely.
The seat/berth combination is very heavy and

weighs approximately 75 kg. Always get at least

one person to help you.

Remove the stowage compartments .

Tip the seat/berth combination forwards,

insert it into seat sliders

and allow it to

engage.

If a seat slider is moved during removal of

the bench seat/berth, the seat sliders of the

guide rails will no longer be parallel to one

another. The seat/berth combination can

then no longer be inserted and engaged.

Move the seat slider to the correct position

first (

page 88).

Fold lever

;

down on all 3 legs of the seat/

berth combination.

Tip the seat/berth combination backwards

and allow it to engage audibly.

Make sure that nobody becomes trapped

when tipping the seat/berth combination.
If indicator tabs

have fully retracted into

the seat legs, the seat/berth combination is

locked in place.

If indicator tabs

are not fully retracted,

press down handle

and check indicator

Seat/berth combination, Marco Polo ACTIVITY / HORIZON

Seats, berths and table

Summary of Contents for Marco Polo 2017

































































































Search results

Summary of Contents for Marco Polo 2017

Reviews:

Related manuals for Marco Polo 2017

Brands by name

Popular brands

Mercedes-Benz Marco Polo 2017, Owner'S Manual Supplement

Search results

Summary of Contents for Marco Polo 2017

Reviews:

Related manuals for Marco Polo 2017

Brands by name

Popular brands