Mercedes-Benz GT S 2016, Operator'S Manual

Page: 225 / 270

cialist workshop, e.g. an authorized
Mercedes-Benz Center.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Before changing a fuse
X
Secure the vehicle against rolling away
(
Y
page 110).
X
Switch off all electrical consumers.
X
Open the driver's door.
The on-board electronics now have status
0 . This is the same as the SmartKey having
been removed.
or, if the SmartKey is inserted in the ignition
lock:
X
Remove the SmartKey from the ignition
lock.
All indicator lamps in the instrument cluster
must be off.
The fuse allocation chart is with the wheel-
change tool kit in the cargo compartment.
Fuse box in the front-passenger foot-
well
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
The floor panel must be installed properly,
otherwise moisture or dirt could impair the
function of the fuses.
X
Open the front-passenger door.
X
To open: remove the carpet over the foot-
rest.
X
Loosen screws
:
on the floor panel using
a suitable tool.
X
Remove the floor panel.
X
To close: install the floor panel again.
X
Screw in and tighten screws
:
.
X
Put in the carpet and press to secure.
Fuse box in the cargo compartment
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
X
Open the tailgate.
X
To open: turn fastener
;
on the service
flap to the left.
X
Open service flap
:
.
Fuses
223
Breakdo
wn
ass
is
tanc
e
Z