Mercedes-Benz GT S 2016, Operator'S Manual

Page: 221 / 270

X
Turn fasteners
:
one
Õ
turn and remove.
X
Remove cover.
All vehicles:
Position number
B
identifies the charged battery of the other vehicle or an equivalent jump-
starting device.
X
Slide cover
A
of positive terminal
:
in the direction of the arrow.
X
Connect positive terminal
:
on your vehicle to positive terminal
;
of donor battery
B
using the jumper cable. Always begin with positive terminal
:
on your own vehicle first.
X
Start the engine of the donor vehicle and run it at idling speed.
X
Connect negative terminal
=
of donor battery
B
to ground point
?
of your vehicle using
the jumper cable, connecting the jumper cable to donor battery
B
first.
X
Start the engine.
X
Before disconnecting the jumper cables, let the engine run for several minutes.
X
First, remove the jumper cables from ground point
?
and negative terminal
=
, then from
positive clamp
:
and positive terminal
;
. Begin each time at the contacts on your own
vehicle first.
X
Close cover
A
of positive clamp
:
after removing the jumper cables.
Vehicles with carbon engine cover:
X
Replace the jump-starting connection point cover. Make sure all mountings for the fasteners
are positioned precisely under the corresponding recesses in the cover.
X
Press fasteners into the mountings until they engage.
All vehicles:
X
Have the battery checked at a qualified specialist workshop.
Jump-starting is not considered to be a normal operating condition.
Jump-starting
219
Br
eakdown
assistance
Z