Mercedes-Benz GT S 2016, Operator'S Manual

Page: 205 / 270

Checking the oil level using the on-board computer
X
Select key position 2 with the Start/Stop button.
X
Use
ò
on the steering wheel to call up the list of menus.
X
Press the
:
or
9
button on the steering wheel to select the Service menu.
X
Confirm by pressing
a
on the steering wheel.
X
Use
:
or
9
to select the Engine Oil Level submenu.
X
Press
a
to confirm the selection.
The Measuring Engine Oil Level Accurate Only When Vehicle Is Level message
appears in the multifunction display .
The measurement takes a few seconds. You will see one of the following messages in the
multifunction display:
Display messages
Possible causes/consequences and
M
Solutions
Engine Oil Level OK
The oil level is correct.
Check Engine Oil
Level (Add 1 Liter)
The oil level is too low.
X
Add 1.1 US qt (1.0 liter) of engine oil.
Reduce Engine Oil
Level
The engine oil level is too high.
X
Have excess engine oil siphoned off.
For Engine Oil
Level Ignition
Must Be On
The ignition is switched off.
X
Select key position 2 with the Start/Stop button.
Need More Time to
Check Engine Oil
Level
The required waiting period was not observed.
X
If the engine is at normal operating temperature: repeat the
measurement after approximately one minute. After 15 minutes
it is no longer possible to take measurements.
If the engine is not at normal operating temperature: measure-
ments can only be taken in a period between 10 minutes and
20 minutes after the engine has been switched off.
Engine Oil Level
Not Measurable
with Engine Running
The engine is running; oil level measurement is not possible.
X
Switch off the engine.
X
Repeat the measurement. Observe the required waiting period.
Engine Oil Level
Correct Measure
ment Only if Vehi
cle Is on Level
Ground
The vehicle is not parked on a level surface.
X
Park the vehicle on a level surface.
Engine compartment
203
Ma
int
enance
and
car
e
Z