#
Take the ratchet out of the tyre-change tool
kit and place it on the hexagon nut of the
jack so that the letters "AUF" are visible.
#
Position support
5
of jack
7
on jack sup‐
port point
4
.
#
Turn ratchet
6
clockwise until support
5
sits completely on jack support point
4
and
the base of the jack lies evenly on the
ground.
#
Turn ratchet
6
until the tyre is raised a max‐
imum of 3 cm from the ground.
#
Loosen and remove the wheel (
/
page 340).
Removing a wheel
Requirements:
R
The vehicle is raised (
/
page 337).
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level
of comfort when braking.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the uppermost wheel bolt com‐
pletely.
#
Screw centring pin
1
into the thread
instead of the wheel bolt.
#
Unscrew the remaining wheel bolts com‐
pletely.
#
Remove the wheel.
Fitting a new wheel
&
WARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts to come loose, as too can dam‐
aged wheel bolts or wheel hub threads.
340 Wheels and tyres
Summary of Contents for EQC 350 4MATIC 2021
