Mercedes-Benz EQC 350 4MATIC 2021, Owner'S Manual

Page: 311 / 453

Exterior lighting
R
Clean the lenses with a wet sponge and mild
cleaning agent, e.g. car shampoo.
R
Only use cleaning agents or cleaning cloths
that are suitable for plastic lenses.
Vehicle socket (high-voltage battery)
R
Use clean water and a soft cloth to clean the
vehicle socket.
R
Do not use a high-pressure cleaner or clean‐
ing agents (for example, soap).
Sensors
R
Clean the sensors in the front and rear
bumpers with a soft cloth and car shampoo
(
/
page 187).
R
When using a high-pressure cleaner, maintain
a minimum distance of 30 cm.
Reversing camera and 360° Camera
R
Open the camera cover with the multimedia
system (
/
page 229).
R
Use clean water and a soft cloth to clean the
camera lens.
R
Do not use a high-pressure cleaner.
Trailer hitch
R
Observe the notes on care in the trailer hitch
manufacturer's operating instructions.
R
Do not clean the ball neck with a high-pres‐
sure cleaner or solvent.
R
Remove traces of rust on the ball, for exam‐
ple, with a wire brush.
R
Remove dirt with a lint-free cloth.
R
After cleaning, lightly oil or grease the ball
head.
% Before using trailers with anti-torsional cou‐
pling, observe the manufacturer's operating
instructions.
Notes on care of the interior
& WARNING Risk of injury from plastic
parts breaking off after the use of sol‐
vent-based care products
Care and cleaning products containing sol‐
vents can cause surfaces in the cockpit to
become porous. When the airbags are
deployed, plastic parts may break away.
#
Do not use any care or cleaning prod‐
ucts containing solvents to clean the
cockpit.
& WARNING Risk of injury or death from
bleached seat belts
Bleaching or dyeing seat belts can severely
weaken them.
This can, for example, cause seat belts to
tear or fail in an accident.
#
Never bleach or dye seat belts.
To avoid damage to the vehicle, observe the fol‐
lowing notes on cleaning and care:
Seat belts
R
Clean with lukewarm and soapy water.
R
Do not use chemical cleaning agents.
R
Do not dry by heating them to over 80°C or
exposing them to direct sunlight.
Display
R
Switch off the display and let it cool down.
308 Maintenance and care