Mercedes-Benz EQC 350 4MATIC 2021, Owner'S Manual

Page: 67 / 453

maximum size setting for child restraint sys‐
tems in weight category II or III.
Contact with the roof when the head
restraint is fully extended and locked in
place will not result in any restrictions on
use.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be fitted facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints as appropriate.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
#
Install the child restraint system.
The entire base of the child restraint system
must always rest on the sitting surface of the
rear seat.
#
Always make sure that the shoulder belt
strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt
guide on the child restraint system.
The shoulder belt strap must be routed
forward from the seat belt outlet.
Notes on vehicles without automatic front
passenger airbag shutoff
Sticker visible when the front passenger door
is open
Vehicles without automatic front passenger air‐
bag shutoff have a special sticker affixed to the
side of the cockpit on the front passenger side.
Make sure you observe the following informa‐
tion:
R
Never fit a rearward-facing child restraint
system to the front passenger seat
R
Always fit a rearward-facing child restraint
system to a suitable rear seat
-
Suitability of seats for attaching belt-
secured child restraint systems
(
/
page 61)
-
Secure the child restraint system with the
seat belt on the rear seat (
/
page 63).
R
Notes on rearward-facing and forward-facing
child restraint systems on the front
passenger seat (
/
page 65)
64 Occupant safety