Mercedes-Benz E 320 1994, Owner'S Manual

Page: 59 / 141

6 Control for
Combination Switch
1 Low beam (with exterior lamp
switch turned to position m )
2 High beam (with exterior lamp
switch turned to position m >
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
7
P82 0 0 73 B13
To operate the turn signals, move
the combination switch past the
point of resistance (up or down).
The switch is automatically
canceled when the steering wheel
is turned to a large enough
degree.
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
• windshield washer system
• headlamp cleaning system
(will work only with exterior
lan^ ^ vitch in position ET3
Canada only:
Also in position E l when the
engine is running)
When the washer system is
activated, the wiper also
operates for a limited time.
7 Windshield wiper control
0 Wiper off
1 Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Note:
The reservoir, hoses and nozzles
of the windshield washer and
headlamp cleaning systems are
automatically heated.